直齿圆柱齿轮精锻成形工艺和模具设计的研究现状
陈丰;魏宝丽;夏显明;
摘要(Abstract):
直齿圆柱齿轮精锻成形是一种极具开发前景的新工艺、新技术,相对传统切削加工方法而言,具有许多不可替代的优点,文章对直齿圆柱齿轮精锻成形工艺和模具设计研究的国内外现状进行了详细的阐述,并指出了所存在的问题,对其进一步的发展趋势进行了预测。
关键词(KeyWords): 直齿圆柱齿轮;精密锻造;模具设计;工艺方案
基金项目(Foundation): 安徽高校省级自然科学研究一般项目(KJ2007B314ZC)
作者(Author): 陈丰;魏宝丽;夏显明;
Email:
DOI:
参考文献(References):
- [1]林治平,陶泽球等.直齿圆柱齿轮精锻工艺方案的研究·锻压技术,1999,(2):9
- [2]K.Kondo Ohga·Precision cold die forging of a ring gear by divided flow method,Int.J.Mach.Tools.Manu.act.,1995,35(8):1105
- [3]Kondo K.Development of New Precision Cold Die Forging Pro-cesses.Advanced Technology of Plasticity—Proc.Of lst.ICTP,Tokyo,1984.701~709
- [4]Kondo K et al.Investigation into Forming Processes of Various Spur Gear—Proc.of2nd ICTP,Stuttgart,1987.1089
- [5]David J and Raghupathi P S.Manufac—turning of Forged and Extruded Gears.Gear Technology,1990.36~43
- [6]Ohga K and Konod K.Research on Application Range of the Precision Cold Die Forming Utilizing Divided Flow to Thick Products.Advanced Technology of Plasticity—Proc.of4th ICTP,Peking,1993.1239~1244
- [7]Nagai Y et al.The Trial for Forming of a Spur Gear Made from the Drawn Cup.Advanced Technology of Plasticity—Proc.of4th ICTP,Peking,1993.1249~1254
- [8]Dean T A.Flashlessdie forging.Metallurgic Metal Forming,1977,44(5):488~498
- [9]Tuncer C and Dean T A.Die Design Alternatives for Precision Forging Hollow in completely closed cavitied.Proc25th Int Ma2chine Tool Design Res Conf,1985,25(1):479~483
- [10]Tuncer C.Precision Forging Hollow Part(Ph.D.Thesis).Britain Birminghan:University of Birminghan,1985.61~65
- [11]Tuncer C and Dean T A.die Design Alternatives for Precision Forming Hollow Parts.Int.J.Mach.Tolls Manufact,1987,27(1):65~76
- [12]Tuncer C and Dean T A.Precision forging hollow parts in novel dies.Journal of Mechanical Working Technology,2988(16):39~50
- [13]林治平,陶泽球,袁汝春.直齿圆柱齿轮精锻工艺的实验研究.锻压技术,1991(6):10~14
- [14]林治平.直齿圆柱齿轮精锻的生产性实验.锻压技术,1999(3):3~5
- [15]田福祥.精密锻造空心件的锻模设计新方案.青岛建筑工程学院学报,1990(1)73~79
- [16]田福祥,林化春.直齿圆柱齿轮热精锻—冷推挤精密成形研究.锻压机械,1997(6):26~28
- [17]田福祥.直齿圆柱齿轮精锻模具齿形设计.锻压技术,1998(2):57~59
- [18]田福祥,孙宗强.汽车内齿轮新型精锻模研制.模具工业,1999(12):31~33
- [19]寇淑清,杨慎华,黄良驹等.直齿圆柱齿轮净形成形技术研究[J].热加工工艺,1999,5:29-31
- [20]寇淑清,杨慎华,夏晓峰.高精度直齿圆柱齿轮冷锻成形加工方法的研究[J].锻压技术,2000,25(5):10–13
- [21]张清萍,赵国群,栾贻国等.直齿圆柱齿轮精锻成形工艺及三维有限元模拟[J].塑性工程学报,2003,10(1):13-15,19
- [22]陈丰,陈次昌.直齿圆柱齿轮冷精锻成形的实验研究[J].锻压技术,2007(2):60-62
- [23]程羽,杨程,李刚等.齿轮精锻成形技术的研究[J].塑性工程学报,2004(6):62-64